User's Guide

SPEED Serial Adaptors User guide
Installing under SCO OpenServer
Page 25
Chapter 2 Installing drivers and host cards
12.In the Install Selection window, click on the Install button.
13.In the pop-up window, click on the Continue button to continue the installation process
The following progress message is now displayed.
The Speed Installation Options window is now displayed.
14.If required, in the Speed Installation Options window, select the Re-Link kernel option.
15.(SCO OpenServer 5 only) If you wish to retain the existing configuration from a previous
device driver installation, in the Speed Installation Options window, select Retain
Configuration Data.
Hint
If you are installing more then one driver, you can de-select this option until you
have installed all the drivers and utilities you require to save time.
Option Only
available if you are
performing an
upgrade on SCO
OpenServer 5