Switch User Manual

Gigabit Media Converter Module – Installation Guide 13
Operation
Status LED
The Perle Gigabit Media Converter Modules have three single
color status LEDs located on the face plate of the module.
PWR - Power/Test
• On: Power is on, module is operating normally
• Blinking slowly: the module is in loopback mode.
• Blinking quickly: the module has a hardware error.
LKF - Fiber Link/Activity
• On: Fiber link present.
• Blinking quickly: Fiber link present and receiving data.
• Blinking slowly: Fiber link disabled due to loss of copper link.
• Off: No fiber link
LKC - Copper Link/Activity
• On: Copper link present.
• Blinking quickly: Copper link present and receiving data.
• Blinking slowly: Copper link disabled due to loss of fiber link.
• Off: No copper link .