Server User Manual
Table Of Contents
- SDS/SCS/STS/MDC User’s Guide
- Table of Contents
- Preface
- Introduction
- Hardware and Connectivity
- Configuration Methods
- Getting Started
- Using DeviceManager and WebManager
- Network Settings
- Configuring Serial Ports
- Introduction
- Serial Ports
- Serial Port Profiles
- Common Tabs
- Console Management Profile
- TruePort Profile
- TCP Sockets Profile
- UDP Sockets Profile
- Terminal Profile
- User Service Settings
- Printer Profile
- Serial Tunneling Profile
- Virtual Modem Profile
- Control Signal I/O Profile
- Modbus Gateway Profile
- Power Management Profile
- Remote Access (PPP) Profile
- Remote Access (SLIP) Profile
- Custom Application Profile
- Port Buffering
- Advanced
- Configuring Users
- Configuring Security
- Configuring I/O Interfaces
- Configuring Clustering
- Configuring the Option Card
- Configuring the System
- Controlling the RPS, I/O Channels, and IPsec Tunnels
- System Administration
- Introduction
- Managing Configuration Files
- Downloading IOLAN Firmware
- Calibrating I/O
- Setting the IOLAN’s Date and Time
- Rebooting the IOLAN
- Resetting the IOLAN to Factory Defaults
- Resetting the SecurID Node Secret
- Language Support
- Downloading Terminal Definitions
- Resetting Configuration Parameters
- Lost Admin Password
- Applications
- RADIUS and TACACS+
- SSL/TLS Ciphers
- Virtual Modem AT Commands
- Pinouts and Cabling Diagrams
- Setting Jumpers
- I/O Wiring Diagrams
- Utilities
- Accessories
- Troubleshooting
- Introduction
- Hardware Troubleshooting
- Communication Issues
- DeviceManager Problems
- Host Problems
- RADIUS Authentication Problems
- Login Problems
- Problems with Terminals
- Unknown IP Address
- DHCP/BOOTP Problems
- Callback Problems
- Language Problems
- Modem Problems
- PPP Problems
- Printing Problems
- Long Reboot Cycle
- SSL/TLS
- I/O Models
- IPv6 Issues
- Contacting Technical Support
- Glossary
- Index
93
IP Settings
IPv6 Settings
Overview
Configure IPv6 settings when the IOLAN resides in an IPv6 network.
Field Descriptions
Configure the appropriate parameters:
WINS Server
Obtain
Automatically
When DHCP/BOOTP is enabled, you can enable this option to have the
IOLAN receive the WINS IP address from the DHCP/BOOTP server.
Default: Enabled
Obtain IPv6
Address(es) using
When enabled, you can configure the IOLAN to obtain the IPv6 address(es)
using IPv6 Autoconfiguration or a DHCPv6 server.
Default: Enabled
IPv6
Autoconfiguration
When enabled, the IOLAN will send out a Router Solicitation message. If a
Router Advertisement message is received, the IOLAN will configure the IPv6
address(es) and configuration parameters based on the information contained in
the advertisement. If no Router Advertisement message is received, the IOLAN
will attempt to connect to a DHCPv6 server to obtain IPv6 addresses and other
configuration parameters.
Default: Enabled
DHCPv6 When enabled, requests IPv6 address(es) and configuration information from
the DHCPv6 server.
Default: Disabled
Custom IPv6
Address List
Displays the list of custom configured IPv6 addresses.
Add Button
x
Adds a custom IPv6 address.
Edit Button
x
Edits an existing IPv6 address.
Delete Button
x
Deletes an IPv6 address from the Custom IPv6 address list.