Server User Manual

Menu
62 IOLAN SDS/SCS/STS/MDC User’s Guide, Version 4.0
Using the Menu
After you have successfully logged in, type screen at the prompt and press Enter. You will be asked
to enter a terminal type, and then you will see the following Menu:
To navigate through the Menu options, do the following:
1. Highlight a Menu option by using the keyboard up and down arrows to navigate the list.
2. When the Menu item you want to access is highlighted, press the Enter key to either get to the
next list of options or to get the configuration screen, depending on what you select.
3. When you are done configuring parameters in a screen, press the Enter key and then the Enter
key again to
Accept and exit the form.
4. If you want to discard your changes, press the Esc key to exit a screen, at which point you will
be prompted with
Changes will be lost, proceed? (y/n), type y to discard your changes or n to
return to the screen so you can press
Enter to submit your changes.
5. If there are a number of predefined options available for a field, you can scroll through those
items by pressing the
Space Bar or you can type l (lowercase L) to get a list of options, use the
up/down arrows to highlight the option you want, and then press
Enter to select it.