Server User Manual
Table Of Contents
- SDS/SCS/STS/MDC User’s Guide
- Table of Contents
- Preface
- Introduction
- Hardware and Connectivity
- Configuration Methods
- Getting Started
- Using DeviceManager and WebManager
- Network Settings
- Configuring Serial Ports
- Introduction
- Serial Ports
- Serial Port Profiles
- Common Tabs
- Console Management Profile
- TruePort Profile
- TCP Sockets Profile
- UDP Sockets Profile
- Terminal Profile
- User Service Settings
- Printer Profile
- Serial Tunneling Profile
- Virtual Modem Profile
- Control Signal I/O Profile
- Modbus Gateway Profile
- Power Management Profile
- Remote Access (PPP) Profile
- Remote Access (SLIP) Profile
- Custom Application Profile
- Port Buffering
- Advanced
- Configuring Users
- Configuring Security
- Configuring I/O Interfaces
- Configuring Clustering
- Configuring the Option Card
- Configuring the System
- Controlling the RPS, I/O Channels, and IPsec Tunnels
- System Administration
- Introduction
- Managing Configuration Files
- Downloading IOLAN Firmware
- Calibrating I/O
- Setting the IOLAN’s Date and Time
- Rebooting the IOLAN
- Resetting the IOLAN to Factory Defaults
- Resetting the SecurID Node Secret
- Language Support
- Downloading Terminal Definitions
- Resetting Configuration Parameters
- Lost Admin Password
- Applications
- RADIUS and TACACS+
- SSL/TLS Ciphers
- Virtual Modem AT Commands
- Pinouts and Cabling Diagrams
- Setting Jumpers
- I/O Wiring Diagrams
- Utilities
- Accessories
- Troubleshooting
- Introduction
- Hardware Troubleshooting
- Communication Issues
- DeviceManager Problems
- Host Problems
- RADIUS Authentication Problems
- Login Problems
- Problems with Terminals
- Unknown IP Address
- DHCP/BOOTP Problems
- Callback Problems
- Language Problems
- Modem Problems
- PPP Problems
- Printing Problems
- Long Reboot Cycle
- SSL/TLS
- I/O Models
- IPv6 Issues
- Contacting Technical Support
- Glossary
- Index
321
Managing Configuration Files
Downloading Configuration Files to Multiple IOLANs
You can download a configuration file to multiple IOLANs at the same time by doing the following
in DeviceManager (DeviceManager is the only configurator that does this function):
1. Select Tools, Download Configuration to Multiple IOLANs.
2. Specify the IOLANs that you want to download the configuration to:
Enter the following information for each IOLAN that you want to configure with the same
configuration file:
IP Address
Server Name
Password
Reboot Server
3. Click Add to add the IOLAN to the download list. You can also click on the IOLAN entry and
edit any information and then click
Update to make the edits permanent.
Enter the IP address of the IOLAN that you want to download the
configuration to.
Field Format: IPv4 or IPv6 address
The name of the IOLAN. The IOLAN name that you put in this field is
passed into the configuration before it is downloaded to the IOLAN and
cannot be left blank.
Enter the Admin user password for the IOLAN.
Determines whether or not the IOLAN is rebooted after it has received the
new configuration. The new configuration definitions will not go into
effect until the IOLAN is rebooted.