Server User Manual
Table Of Contents
- SDS/SCS/STS/MDC User’s Guide
- Table of Contents
- Preface
- Introduction
- Hardware and Connectivity
- Configuration Methods
- Getting Started
- Using DeviceManager and WebManager
- Network Settings
- Configuring Serial Ports
- Introduction
- Serial Ports
- Serial Port Profiles
- Common Tabs
- Console Management Profile
- TruePort Profile
- TCP Sockets Profile
- UDP Sockets Profile
- Terminal Profile
- User Service Settings
- Printer Profile
- Serial Tunneling Profile
- Virtual Modem Profile
- Control Signal I/O Profile
- Modbus Gateway Profile
- Power Management Profile
- Remote Access (PPP) Profile
- Remote Access (SLIP) Profile
- Custom Application Profile
- Port Buffering
- Advanced
- Configuring Users
- Configuring Security
- Configuring I/O Interfaces
- Configuring Clustering
- Configuring the Option Card
- Configuring the System
- Controlling the RPS, I/O Channels, and IPsec Tunnels
- System Administration
- Introduction
- Managing Configuration Files
- Downloading IOLAN Firmware
- Calibrating I/O
- Setting the IOLAN’s Date and Time
- Rebooting the IOLAN
- Resetting the IOLAN to Factory Defaults
- Resetting the SecurID Node Secret
- Language Support
- Downloading Terminal Definitions
- Resetting Configuration Parameters
- Lost Admin Password
- Applications
- RADIUS and TACACS+
- SSL/TLS Ciphers
- Virtual Modem AT Commands
- Pinouts and Cabling Diagrams
- Setting Jumpers
- I/O Wiring Diagrams
- Utilities
- Accessories
- Troubleshooting
- Introduction
- Hardware Troubleshooting
- Communication Issues
- DeviceManager Problems
- Host Problems
- RADIUS Authentication Problems
- Login Problems
- Problems with Terminals
- Unknown IP Address
- DHCP/BOOTP Problems
- Callback Problems
- Language Problems
- Modem Problems
- PPP Problems
- Printing Problems
- Long Reboot Cycle
- SSL/TLS
- I/O Models
- IPv6 Issues
- Contacting Technical Support
- Glossary
- Index
IOLAN SDS/SCS/STS/MDC User’s Guide, Version 4.0 295
Configuring the Option
Card Chapter 12
12
Introduction
SCS models have a built-in option card slot that supports either a Perle
IOLAN modem card (purchased separately) or Perle PCI Adapter card
(purchased separately) for use with a user supplied wireless WAN card.
Option Card Settings
Overview
The Option Card settings allow you to configure the option card slot for either a Perle IOLAN
modem card or a Perle PCI Adapter/wireless WAN card.
Functionality
The Perle IOLAN modem card or Perle PCI Adapter/wireless WAN card slide into the PCI slot as
described in
Installing a Perle PCI Card on page 395.
Configuring the IOLAN Modem Card
The IOLAN Modem card Configure button automatically takes you to the Terminal serial port
profile, although you can set and configure any serial port profile appropriate for modem use. See the
Chapter 7, Configuring Serial Ports on page 113 for information on the configuration options for the
serial port profile that fits your modem usage.