Server User Manual
Table Of Contents
- SDS/SCS/STS/MDC User’s Guide
- Table of Contents
- Preface
- Introduction
- Hardware and Connectivity
- Configuration Methods
- Getting Started
- Using DeviceManager and WebManager
- Network Settings
- Configuring Serial Ports
- Introduction
- Serial Ports
- Serial Port Profiles
- Common Tabs
- Console Management Profile
- TruePort Profile
- TCP Sockets Profile
- UDP Sockets Profile
- Terminal Profile
- User Service Settings
- Printer Profile
- Serial Tunneling Profile
- Virtual Modem Profile
- Control Signal I/O Profile
- Modbus Gateway Profile
- Power Management Profile
- Remote Access (PPP) Profile
- Remote Access (SLIP) Profile
- Custom Application Profile
- Port Buffering
- Advanced
- Configuring Users
- Configuring Security
- Configuring I/O Interfaces
- Configuring Clustering
- Configuring the Option Card
- Configuring the System
- Controlling the RPS, I/O Channels, and IPsec Tunnels
- System Administration
- Introduction
- Managing Configuration Files
- Downloading IOLAN Firmware
- Calibrating I/O
- Setting the IOLAN’s Date and Time
- Rebooting the IOLAN
- Resetting the IOLAN to Factory Defaults
- Resetting the SecurID Node Secret
- Language Support
- Downloading Terminal Definitions
- Resetting Configuration Parameters
- Lost Admin Password
- Applications
- RADIUS and TACACS+
- SSL/TLS Ciphers
- Virtual Modem AT Commands
- Pinouts and Cabling Diagrams
- Setting Jumpers
- I/O Wiring Diagrams
- Utilities
- Accessories
- Troubleshooting
- Introduction
- Hardware Troubleshooting
- Communication Issues
- DeviceManager Problems
- Host Problems
- RADIUS Authentication Problems
- Login Problems
- Problems with Terminals
- Unknown IP Address
- DHCP/BOOTP Problems
- Callback Problems
- Language Problems
- Modem Problems
- PPP Problems
- Printing Problems
- Long Reboot Cycle
- SSL/TLS
- I/O Models
- IPv6 Issues
- Contacting Technical Support
- Glossary
- Index
VPN
236 IOLAN SDS/SCS/STS/MDC User’s Guide, Version 4.0
Remote Validation Criteria Field Descriptions
When the Authentication Method is set to X.509 Certificate, you can configure the remote
validation criteria. The information in the remote X.509 certificate must match exactly the
information configured in this window in order to successfully authenticate and create a valid
connection.
Configure the following parameters:
Country
State/Province
Locality
Organization
Organization Unit
Common Name
Email
A country code; for example, US. This field is case sensitive in order to
successfully match the information in the remote X.509 certificate.
Data Options: Two characters, asterisk (*) works as a wildcard
An entry for the state/province; for example, IL. This field is case sensitive in
order to successfully match the information in the remote X.509 certificate.
Data Options: Maximum 128 characters, asterisk (*) works as a wildcard
An entry for the location; for example, Chicago. This field is case sensitive in
order to successfully match the information in the remote X.509 certificate.
Data Options: Maximum 128 characters, asterisk (*) works as a wildcard
An entry for the organization; for example, Accounting. This field is case
sensitive in order to successfully match the information in the remote X.509
certificate.
Data Options: Maximum 64 characters, asterisk (*) works as a wildcard
An entry for the unit in the organization; for example, Payroll. This field is
case sensitive in order to successfully match the information in the remote
X.509 certificate.
Data Options: Maximum 64 characters, asterisk (*) works as a wildcard
An entry for common name; for example, the host name or fully qualified
domain name. This field is case sensitive in order to successfully match the
information in the remote X.509 certificate.
Data Options: Maximum 64 characters, asterisk (*) works as a wildcard
An entry for an email address; for example, acct@anycompany.com. This field
is case sensitive in order to successfully match the information in the remote
X.509 certificate.
Data Options: Maximum 64 characters, asterisk (*) works as a wildcard