Server User Manual
Table Of Contents
- SDS/SCS/STS/MDC User’s Guide
- Table of Contents
- Preface
- Introduction
- Hardware and Connectivity
- Configuration Methods
- Getting Started
- Using DeviceManager and WebManager
- Network Settings
- Configuring Serial Ports
- Introduction
- Serial Ports
- Serial Port Profiles
- Common Tabs
- Console Management Profile
- TruePort Profile
- TCP Sockets Profile
- UDP Sockets Profile
- Terminal Profile
- User Service Settings
- Printer Profile
- Serial Tunneling Profile
- Virtual Modem Profile
- Control Signal I/O Profile
- Modbus Gateway Profile
- Power Management Profile
- Remote Access (PPP) Profile
- Remote Access (SLIP) Profile
- Custom Application Profile
- Port Buffering
- Advanced
- Configuring Users
- Configuring Security
- Configuring I/O Interfaces
- Configuring Clustering
- Configuring the Option Card
- Configuring the System
- Controlling the RPS, I/O Channels, and IPsec Tunnels
- System Administration
- Introduction
- Managing Configuration Files
- Downloading IOLAN Firmware
- Calibrating I/O
- Setting the IOLAN’s Date and Time
- Rebooting the IOLAN
- Resetting the IOLAN to Factory Defaults
- Resetting the SecurID Node Secret
- Language Support
- Downloading Terminal Definitions
- Resetting Configuration Parameters
- Lost Admin Password
- Applications
- RADIUS and TACACS+
- SSL/TLS Ciphers
- Virtual Modem AT Commands
- Pinouts and Cabling Diagrams
- Setting Jumpers
- I/O Wiring Diagrams
- Utilities
- Accessories
- Troubleshooting
- Introduction
- Hardware Troubleshooting
- Communication Issues
- DeviceManager Problems
- Host Problems
- RADIUS Authentication Problems
- Login Problems
- Problems with Terminals
- Unknown IP Address
- DHCP/BOOTP Problems
- Callback Problems
- Language Problems
- Modem Problems
- PPP Problems
- Printing Problems
- Long Reboot Cycle
- SSL/TLS
- I/O Models
- IPv6 Issues
- Contacting Technical Support
- Glossary
- Index
233
VPN
Adding/Editing the IPsec Tunnel
When you click the Add button or select an IPsec tunnel and click the Edit button, the following
window is displayed:
Configure the following parameters:
Name Provide a name for the IPsec VPN tunnel to make it easy to identify.
Text Characteristics: Maximum of 16 characters, spaces not allowed
Authentication
Method
Specify the authentication method that will be used between VPN peers to
authenticate the VPN tunnel.
Data Options:
z Shared Secret—A text-based secret that is used to authenticate the IPsec
tunnel (case sensitive). This applies to all VPN tunnels (IPsec and
L2TP/IPsec).
z RSA Signature—RSA signatures are used to authenticate the IPsec
tunnel. When using this authentication method, you must download the
IPsec RSA public key to the IOLAN and upload the IPsec RSA public key
from the IOLAN to the VPN gateway.
z X.509 Certificate—X.509 certificates are used to authenticate the IPsec
tunnel. When using this authentication method, you must include the
signing authority’s certificate information in the SSL/TLS CA list and
download it to the IOLAN.
Default: Shared Secret