Server User Manual
Table Of Contents
- SDS/SCS/STS/MDC User’s Guide
- Table of Contents
- Preface
- Introduction
- Hardware and Connectivity
- Configuration Methods
- Getting Started
- Using DeviceManager and WebManager
- Network Settings
- Configuring Serial Ports
- Introduction
- Serial Ports
- Serial Port Profiles
- Common Tabs
- Console Management Profile
- TruePort Profile
- TCP Sockets Profile
- UDP Sockets Profile
- Terminal Profile
- User Service Settings
- Printer Profile
- Serial Tunneling Profile
- Virtual Modem Profile
- Control Signal I/O Profile
- Modbus Gateway Profile
- Power Management Profile
- Remote Access (PPP) Profile
- Remote Access (SLIP) Profile
- Custom Application Profile
- Port Buffering
- Advanced
- Configuring Users
- Configuring Security
- Configuring I/O Interfaces
- Configuring Clustering
- Configuring the Option Card
- Configuring the System
- Controlling the RPS, I/O Channels, and IPsec Tunnels
- System Administration
- Introduction
- Managing Configuration Files
- Downloading IOLAN Firmware
- Calibrating I/O
- Setting the IOLAN’s Date and Time
- Rebooting the IOLAN
- Resetting the IOLAN to Factory Defaults
- Resetting the SecurID Node Secret
- Language Support
- Downloading Terminal Definitions
- Resetting Configuration Parameters
- Lost Admin Password
- Applications
- RADIUS and TACACS+
- SSL/TLS Ciphers
- Virtual Modem AT Commands
- Pinouts and Cabling Diagrams
- Setting Jumpers
- I/O Wiring Diagrams
- Utilities
- Accessories
- Troubleshooting
- Introduction
- Hardware Troubleshooting
- Communication Issues
- DeviceManager Problems
- Host Problems
- RADIUS Authentication Problems
- Login Problems
- Problems with Terminals
- Unknown IP Address
- DHCP/BOOTP Problems
- Callback Problems
- Language Problems
- Modem Problems
- PPP Problems
- Printing Problems
- Long Reboot Cycle
- SSL/TLS
- I/O Models
- IPv6 Issues
- Contacting Technical Support
- Glossary
- Index
Advanced
106 IOLAN SDS/SCS/STS/MDC User’s Guide, Version 4.0
Account Settings
Enter the information about your DynDNS.com account so the IOLAN can communicate IP address
updates. These settings are global and apply to all Dynamic DNS settings.
Configure the appropriate parameters:
User Name Specify the user name used to access the account set up on the DynDNS.org
server.
Password Specify the password used to access the account set up on the DynDNS.org
server.
Account Settings
Button
Click this button to configure the Dynamic DNS DynDNS.org account
information.
System Type Specify how your account IP address schema was set up with DynDNS.org.
Refer to www.DynDNS.org for information about this parameter.
Data Options: Dynamic, Static, Custom
Default: Dynamic
Wildcard Adds an alias to *.yourcompanySCS.dyndns.org pointing to the same IP
address as entered for
yourcompanySCS.dyndns.org.
Connection Method Specify how the IOLAN is going to connect to the DynDNS.org server.
Data Options:
z HTTP
z HTTP through Port 8245
z HTTPS—for a secure connection to the DynDNS server
Default: Disabled
Cipher Suite Button Launches the cipher information window so you can specify the type of
encryption that will be used for data that is transferred between the
DynDNS.org server and the IOLAN.
See Cipher Suite Field Descriptions on page 107 for more information.