User guide

ManualsBrandsPERKO ManualsLighting1152

16490 N.W. 13th Avenue Miami, FL 33169-5707

Scale: None

Date: 9/17/82

Revised: 7/28/99

Drawn By: D. Beutler

CAT. NO.S 1152E01 AND 1152ME1

STERN & TOWING NAVIGATION LIGHTS

No. Name of Piece No. Req. Material Size & Spec

1 Cap & Retainer 1 Polycarb. Cat. No. 1105000BLK

2 O-Ring Cat. No. 1119 1 Neoprene 4-5/8” x 4-1/4” x 1/8”

3 Body 1 Brass or 20 Ga. - .032”

Galv Steel

4 Lens 1 Polycarb. (See Note #1)

5 Socket 1 Phenolic Cat No. 0347A00

6 Socket Mounting Screws 2 Stainless Steel 2-38 x 3/4” R.H.

7 Socket Support Stand 1 Brass Cat. No. 0341001PLB

8 Ground Screw and Nut 1 Stainless Steel 2-38 x 3/4” R.H.

9 Packing Nut & Gland Ring 1 Brass For 7/16”-SO Cable

10 Certification Plate 1 Brass Not Available

BILL OF MATERIAL

NOTES:

1. Lens White (Clear) Stern: Cat. No. 0269001WHT

Yellow Towing: Cat. No. 0269001YLW

2. Socket Medium Prefocus phenolic

250 Volts - 1000 watts

Bryant No. 3743 U.L. Listed ( Cat. No. 0347A)

3. Weight 5 lbs 0 ozs.

For Vessels Over

20 Meters (65.6 Ft.) in Length

Cat. No. Finish Description Visible Visible Reg. Lamp

Arc Miles Watts Cat. No.

1152E01GAL Galv Steel White Stern 135° 2 7.5 0342000CLR

1152E01PLB Pln Brass White Stern 135° 2 7.5 0342000CLR

1152E01POL Pol Brass White Stern 135° 2 7.5 0342000CLR

1152ME1GAL Galv Steel Yellow Towing 135° 2 7.5 0342000CLR

1152ME1PLB Pln Brass Yellow Towing 135° 2 7.5 0342000CLR

1152ME1POL Pol Brass Yellow Towing 135° 2 7.5 0342000CLR

VISIBILITY AND WATTAGE SPECIFICATIONS*

*Bulb Data - These are special PERKO Navigation

Lamps, 120 Volts, T-10, Prefocus Base, C-8

Filament, Clear 2-3/8 Inch L.C.L., and must

be used to meet the ‘72 COLREGS.

These navigation lights meet the U.S. Coast Guard

Requirements under the ‘72 COLREGS and are classi-

fied by Underwriters’ Laboratories Standard U.L. 1104 to

meet the ‘72 COLREGS.

NOTE:

WIRE ONLY THROUGH TERMINAL TUBE USING 16/3

SO CABLE WITH 7/16 INCH NOMINAL O.D. TO

RETAIN WATERTIGHT INTEGRITY AND COMPLY

WITH U.L. 1104.

1152INS1

Summary of content (2 pages)

PAGE 1
BILL OF MATERIAL No. Name of Piece 1 Cap & Retainer 2 O-Ring Cat. No. 1119 3 Body 4 5 6 7 8 9 10 No. Req. 1 1 1 Lens 1 Socket 1 2 1 1 1 1 Socket Mounting Screws Socket Support Stand Ground Screw and Nut Packing Nut & Gland Ring Certification Plate Material Polycarb. Neoprene Brass or Galv Steel Polycarb. Phenolic Size & Spec Cat. No. 1105000BLK 4-5/8” x 4-1/4” x 1/8” 20 Ga. - .032” (See Note #1) Cat No. 0347A00 Stainless Steel 2-38 x 3/4” R.H. Brass Cat. No.
PAGE 2
NAVIGATION LIGHT CERTIFICATE OF COMPLIANCE This navigation light has been tested and classified by UNDERWRITERS’ LABORATORIES, INC. (U.L.) in accordance with the ‘72 COLREGS and the U.S. INLAND NAVIGATION RULES ACT OF 1980. When properly installed, and fitted with the correct lamp, this light is approved by the U.S. Coast Guard for use aboard U.S. Coast Guard inspected vessels. This certification is also accepted by other inspecting authorities.