User Manual

Quantity
Item Component # Description 0200TAB 0200MAB 0200GRB
1 151C005 BASE, MOLDING 1 1 1
2 A151C040 LENS, ASSY., TRI-COLOR 1
A151C041 LENS, ASSY., MASTHEAD 1
A151C040 LENS, ASSY., GRN/RED 1
3 6062-001 GLAND 1 1 1
4 151B007 CLAMP 1 1 1
5 6061-001 O-RING 1 1 1
6 151C017 BULB HOLDER 1 1 1
7 A151B046 SUPPORT ROD ASSY., L.H. 1 1 1
8 151C047 BULB HOLDER SUPPORT, UPPER 1 1 1
9 A151C048 BULB HLODER ASSY., UPPER 1 1 1
10 151B008 PLATE, BULB SUPPORT 1 1 1
11 6016-006 SCREW #6 X 1/2” L, P.H. PHILLIPS 4 4 4
12 6016-002 SCREW #4 X 1/4” L, P.H. PHILLIPS 4 4 4
13 A151B012 CONTACT ASSY., BULB 2 2 2
14 A151B050 SUPPORT ROD ASSY., R.H. 1 1 1
*15 See Table 2 BULB 1 1 1
*16 See Table 2 BULB 1 1 1
BILL OF MATERIAL
16490 N.W. 13th Avenue Miami, FL 33169-5707
Scale: None
Date: 2/18/87
Revised: 12/7/04
Drawn By: R. Levy
0200 SERIES BASE MOUNT (DUAL TIER)
NAVIGATION LIGHT ASSEMBLIES
Drawing Visibility Bulb Cat. No.
Number Model Description Weight Lens/Color Arc Miles Watts 12V 24V 32V
A151C045 0200GRB Green/Red Light All-Round - Green (A) 360°
All-Round - Red (B) 360°
A151C043 0200TAB Tri-Color/White 13 oz. Starboard -Green (A) 112.5°
All-Round Base Light Port - Red (A) 112.5° 2 25 037512V25W 037524V25W 037532V25W
Stern - White (A) 135°
All-Round White (A) 360° 2 10 037512V10W 037524V10W 037532V10W
A151C044 0200MAB Masthead/White 14 oz. Masthead - White (A) 225° 3 25 037512V25W 037524V25W 037532V25W
All-Round Base Light All-Round - White (B) 360° 2 10 037512V10W 037524V10W 037532V10W
* To select the correct bulb catalog number, proceed as follows:
1. Find the model number on table #2.
2. Select the bulb catalog number under the proper voltage. Select 12, 24 or 32 volt options.
Example: Bulb for 0200MAB, 32 volts - Item 15 = 037532V25W
Item 16 = 037532V10W
These Navigation Lights meet A.B.Y.C. requirements and are designed to meet the 1972 COLREGS, and U.S. Inland Navigation
Rules Act of 1980.
Wiring to be done in accordance with both A.B.Y.C. Standard E-9* and U.S. Coast Guard Safety Standards for boat electrical sys-
tems (33 CFR)** or electrical standards required by other appropriate authorities. Minimum #16 gauge wire recommended.
** The above referenced Standards can be obtained from:
(1). American Boat & Yacht Council, Inc.
613 Third Street, Suite 10
Annapolis, MD 21403
(2). U.S. Coast Guard
Washington, D.C. 20593
(or your local C.G. Office)
VISIBILITY AND LAMP SPECIFICATIONS
Table 2
0200INS7 - 11/06
Table 1
Light Visibility
0200GRB 2nm/2nm
0200MAB 3nm/2nm
0200TAB* 2nm/2nm
The above lights are all
approved for 12V, 24V or
32V applications except
where noted.
* Not Yet Approved for
32V Applications
USCG APPROVAL
33 CFR 183.810
Visibility: Varies
Tested By: IMANNA Labs.
Dates: 2/26/03, 6/18/03
and 8/15/03
Meets ABYC A-16