Installation Manual

Chapter 4 N38143
Page 28
Remote expansion tank - 4.4GM, 4.4TGM & 4.4TW2GM
A remotely mounted expansion tank is supplied as standard with a capacity of 19 litres. A remote cooler
expansion tank kit can be tted using the following procedure.
Mount the remote expansion tank in a position where the bottom of the unit is as shown in gure (J).
Connect the new bleed hoses (J2) to the tank and the ttings on the engine.
Connect the main inlet hose to the engine (J3).
1.
2.
3.