Operation and maintenance manual

402F-05 Engine
Table 12
402F-05 Engine
Refill Capacities
Compartment or System
Liters
Quarts
Engine Only
1.1 1.2
External System Per OEM
(1)
Total Cooling System
(2)
(1)
The External System includes a radiator or an expansion tank
with the following components: heat exchanger and piping. Re-
fer to the OEM specifications. Enter the value for the capacity of
the External System in this row.
(2)
The Total Cooling System capacity includes the capacity of the
Engine plus the External System. Enter the value for the ca-
pacity of the Total Cooling System in this row.
403F-07 Engine
Table 13
403F-07 Engine
Refill Capacities
Compartment or System
Liters
Quarts
Engine Only
1.2 1.3
External System Per OEM
(1)
Total Cooling System
(2)
(1)
The External System includes a radiator or an expansion tank
with the following components: heat exchanger and piping. Re-
fer to the OEM specifications. Enter the value for the capacity of
the External System in this row.
(2)
The Total Cooling System capacity includes the capacity of the
Engine plus the External System. Enter the value for the ca-
pacity of the Total Cooling System in this row.
403F-11 Engine
Table 14
403F-11 Engine
Refill Capacities
Compartment or System
Liters
Quarts
Engine Only
1.9 2.0
External System Per OEM
(1)
Total Cooling System
(2)
(1)
The External System includes a radiator or an expansion tank
with the following components: heat exchanger and piping. Re-
fer to the OEM specifications. Enter the value for the capacity of
the External System in this row.
(2)
The Total Cooling System capacity includes the capacity of the
Engine plus the External System. Enter the value for the ca-
pacity of the Total Cooling System in this row.
403F-15 Engines
Table 15
403F-15 Engines
Refill Capacities
Compartment or System
Liters
Quarts
Engine Only
2.6 2.7
External System Per OEM
(1)
Total Cooling System
(2)
(1)
The External System includes a radiator or an expansion tank
with the following components: heat exchanger and piping. Re-
fer to the OEM specifications. Enter the value for the capacity of
the External System in this row.
(2)
The Total Cooling System capacity includes the capacity of the
Engine plus the External System. Enter the value for the ca-
pacity of the Total Cooling System in this row.
i05339080
Fluid Recommendations
General Coolant Information
NOTICE
Never add coolant to an overheated engine. Engine
damage could result. Allow the engine to cool first.
NOTICE
If the engine is to be stored in, or shipped to an area
with below freezing temperatures, the cooling system
must be either protected to the lowest outside temper-
ature or drained completely to prevent damage.
NOTICE
Frequently check the specific gravity of the coolant for
proper freeze protection or for anti-boil protection.
Clean the cooling system for the following reasons:
• Contamination of the cooling system
• Overheating of the engine
• Foaming of the coolant
NOTICE
Never operate an engine without water temperature
regulators in the cooling system. Water temperature
regulators help to maintain the engine coolant at the
proper operating temperature. Cooling system prob-
lems can develop without water temperature
regulators.
38 SEBU9064
Refill Capacities
Fluid Recommendations