Installation Manual

Chapter 8 N40475
Page 36
Figure 18
For engines without an MJB (Marine
Junction Box)
The customer connect harness (gure 18) can be
used as a connection point for the various control
panel options for both single engine applications and
twin engine applications and is intended as a direct
replacement for the MJB whilst maintaining the same
functionality.
Figure 19 shows the main components.
1. Engine interface (ECM).
2. Twin engine.
3. Throttle synchronisation and slow vessel mode.
4. Key switch.
5. Throttle.
6. J1939.
7. Fuse (ignition).
8. Fuse (ECM and battery).
Figure 19