Installation Manual
N40475 Chapter 8
Page 31
Mini Marine Power Dispaly (MMPD)
instructions
The Mini Marine Power Display (MMPD) provides
current engine and transmission operating data. The
screen can be customized to display various engine
parameters.
Information screens
There are two information screens available, the
System Information screen and the Control System
Information screen (gure 10). Pressing the button
labelled Menu will display the System Information
screen or the control system Information screen.
The System Information screen is the rst screen
displayed by default, however the MMPD will retain
which information screen was displayed last until a
power-off/reset.
System information screen
The System Information screen will display the current
User Name, Software Version, ROM Bootloader
Software Version, Unit Serial Number, Unit Location,
Engine Location, Display Units, and Vessel Speed
Units.
Pressing the button labelled Menu will display the
System Information menu screen. On this screen, the
button function is re-dened as shown on the right
side of the screen, see gure 11. If a diagnostic code
is active and the diagnostic code window is on screen,
the button actions return to their normal denitions.
Pressing the up or down arrow button will cause the
top menu item (labelled Change Screen) to scroll
through the items to be changed (Change Screen,
Change User, Change Unit Location, Change Display
Units, and Change Vessel Speed Units) and cause
the selected data to be displayed in reverse video.
Pressing the alarm button will cause the specied
parameter to scroll through each available value (i.e.
Change Vessel Speed would scroll through Knots,
MPH, and KPH). Pressing the button labelled Exit will
return the display to the System Information screen
and save any changed data to non-volatile memory.
Figure 10
Figure 11