Installation Manual

N40475 Chapter 8
Page 25
Interconnecting cables
Interconnecting cables (gure 3) are used to join the
engine (1), throttle (3), battery (4), via the marine
junction box (2), to the instrument panel(s) (5). Cables
are made in a 12m length as standard, 3, 6 & 9 lengths
are optional. If a longer cable is required it should be
ordered as a special item, to be made in one piece.
Figure 2 shows:
1. Engine.
2. MJB (Marine Junction Box).
3. Throttle.
4. Battery (customer supplied).
5. Instrument panel - main or auxiliary.
6. MMPD, digital panel.
7. Keyswitch panel.
8. Harness, engine to MJB.
9. Harness, throttle.
10. Harness, main or auxiliary panel, J1939 requires
tee connector.
11. Harness, keyswitch.
12. Harness, MMPD (digital panel).
13. Battery lead (customer supply).
14. Master/slave lead.
Figure 2
Figure 3