Troubleshooting

(Table 118, contd)
Troubleshooting Test Steps
Values Results
A. Visually inspect each terminal in the connector. Verify that the
terminals are not damaged. Verify that the terminals are correctly
aligned in the connector and verify that the terminals are correctly
located in the connector.
Terminals are
aligned and
undamaged
Repair: Repair the terminals and/or replace the terminals,
as required.
Use the electronic service tool in order to clear all logged di-
agnostic codes and then verify that the repair eliminates the
fault.
Result: The terminals are OK.
Proceed to Test Step 4.
Illustration 83 g01802454
A typical example of the lock wedge.
(1) Lock wedge
UENR0612-07 263
Service
This document has been printed from SPI2. NOT FOR RESALE