SPECIFICATIONS

i04823040
Rocker Shaft
Illustration 9 g02842156
Typical example
(1) Inlet rocker arm
Diameter of the rocker arm bore
. . . . . . . . . . . . . . . . . . . . . . . 19.020 to 19.033 mm
((0.74882 to 0.74933 inch))
(2) Exhaust rocker arm
Diameter of the rocker arm bore
. . . . . . . . . . . . . . . . . . . . . . . 19.020 to 19.033 mm
((0.74882 to 0.74933 inch))
Clearance
Maximum clearance of both the rocker arm
bores.
. .0.020 to 0.054 mm ((0.00079 to 0.00213 inch))
(3) Diameter of the rocker shaft
. . .18.979 to 19.000 mm ((0.74720 to 0.74803 inch))
Illustration 10 g02681778
Tightening sequence
Tighten the fasteners in the sequence that is in
illustration 10 . Tighten the fasteners to the following
torque. . . . . . . . . . . . . . . . . . . . . . . 10 N·m ((89 lb in))
8 UENR0622-02
Specifications Section
This document has been printed from SPI2. NOT FOR RESALE