SPECIFICATIONS

(2) Tighten the fastener to the following torque.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 N·m ((89 lb in))
(3) Tighten the sensor to the following torque.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 N·m ((89 lb in))
(4) Tighten the fastener to the following torque.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 N·m ((11 lb ft))
i04555069
Oxygen Sensor
Illustration 82 g02844456
Typical example
(1) Tighten the sensor to the following torque.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 N·m ((37 lb ft))
50 UENR0622-02
Specifications Section
This document has been printed from SPI2. NOT FOR RESALE