SPECIFICATIONS

12V Alternators
Illustration 74 g03357160
Typical example
(1) Terminal “W”
(2) Terminal “D+”
(3) Terminal “B+”
Tighten the nut on the terminal to the following
torque. . . . . . . . . . . . . . . . 7.75 N·m ((68.60 lb in))
Tighten the nut for the alternator pulley to the
following torque. . . . . . . . . . . . . . . . 50 N·m ((37 lb ft))
Output
The outputs of the alternators . . . . 100 Amp, and
120 Amp
24V Alternator
Illustration 75 g02620019
Typical example
(3) Terminal “W”
(1) Terminal “B+”
Tighten the nut on the terminal to the following.
. . . . . . . . . . . . . . . . . . . . . 7.75 N·m ((68.60 lb in))
(2) Terminal “D+”
Tighten the nut on the terminal to the following.
. . . . . . . . . . . . . . . . . . . . . 3.25 N·m ((28.76 lb in))
Tighten the nut for the alternator pulley to the
following torque. . . . . . . . . . . . . . . . 50 N·m ((37 lb ft))
Output
The outputs of the alternators . . . . . . . . . 65 Amp
i04415750
Starter Motor
UENR0622-02 47
Specifications Section
This document has been printed from SPI2. NOT FOR RESALE