SPECIFICATIONS

12V Alternator
Illustration 72 g03357091
Typical example
(1) Terminal “D+”
(3) Terminal “W”
(2) Terminal “B+”
Tighten the nut on the terminal to the following
torque. . . . . . . . . . . . . . . . . . . . 11 N·m ((97 lb in))
Tighten the nut for the alternator pulley to the
following torque. . . . . . . . . . . . . . . . 50 N·m ((37 lb ft))
Output
The output of the alternator . . . . . . . . . . . 65 Amp
12V Alternator
Illustration 73 g03357125
Typical example
(3) Terminal “W”
(1) Terminal “D+”
Tighten the nut on the terminal to the following
torque. . . . . . . . . . . . . . . . 3.25 N·m ((28.76 lb in))
(2) Terminal “B+”
Tighten the nut on the terminal to the following
torque. . . . . . . . . . . . . . . . . . . . 11 N·m ((97 lb in))
Tighten the nut for the alternator pulley to the
following torque. . . . . . . . . . . . . . . . 50 N·m ((37 lb ft))
Output
The output of the alternator . . . . . . . . . . . 80 Amp
46 UENR0622-02
Specifications Section
This document has been printed from SPI2. NOT FOR RESALE