SPECIFICATIONS

i04346112
Flywheel Housing
Illustration 65 g02501136
Typical example
Tighten the setscrews in the sequence that is shown
in illustration 65 to an initial torque.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 N·m ((15 lb ft))
Illustration 66 g02727691
Typical example
Tighten setscrews (1), (2), (3), (4), (5), (6), (7) and (8)
in the sequence that is shown in illustration 66 to a
final torque. . . . . . . . . . . . . . . . . . . 110 N·m ((81 lb ft))
Tighten setscrews (9) and (10) in the sequence that
is shown in illustration 66 to a final torque.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 N·m ((26 lb ft))
UENR0622-02 43
Specifications Section
This document has been printed from SPI2. NOT FOR RESALE