SPECIFICATIONS

i04555081
Balancer
Illustration 58 g02727673
Typical example
Tighten the bolts in the sequence that is shown in
illustration 58 to the following torque.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 N·m ((52 lb ft))
Backlash values
Backlash between the balancer gears
. .0.075 to 0.165 mm ((0.00295 to 0.00650 inch))
Backlash between the balancer gear and the
crankshaft gear
. . 0.110 to 0.210 mm ((0.00433 to 0.00827 inch))
i05240669
Front Housing and Covers
Illustration 59 g02909257
Typical example
UENR0622-02 39
Specifications Section
This document has been printed from SPI2. NOT FOR RESALE