SPECIFICATIONS

Illustration 50 g02841978
Typical example
(4) Journal 1
(5) Journal 2
(6) Journal 3
(7) Journal 4
(8) Journal 5
Refer to table 4 for the run out of the crankshaft
journals.
Table 4
Journal Run out of the Journals
(1) Mounting
(2) 0.03 mm (0.00118 inch)
(3) 0.03 mm (0.00118 inch)
(4) 0.03 mm (0.00118 inch)
(5) Mounting
Inspect the crankshaft for wear or for damage. For
more information regarding the servicing of the
crankshaft, contact the Global Technical Support
Center.
Refer to Specifications, “Connecting Rod Bearing
Journal” for more information on the connecting rod
bearing journals and connecting rod bearings.
Refer to Specifications, “Main Bearing Journal” for
information on the main bearing journals and for
information on the main bearings.
i04332830
Connecting Rod Bearing
Journal
The original size of the connecting rod bearing
journal on the crankshaft
. . .71.970 to 71.990 mm ((2.83346 to 2.83425 inch))
Maximum permissible wear of a bearing journal on
the crankshaft when a new connecting rod is installed
. . . . . . . . . . . . . . . . . . . . . . 0.04 mm ((0.00157 inch))
Width of the connecting rod bearing journals on the
crankshaft
. . . . .37.962 to 38.038 mm ((1.4946 to 1.4976 inch))
Radius of the fillet of the connecting rod bearing
journals . . 1.6 to 1.7 mm ((0.06299 to 0.06693 inch))
UENR0622-02 33
Specifications Section
This document has been printed from SPI2. NOT FOR RESALE