SPECIFICATIONS

i05955207
Crankshaft
Illustration 49 g02841976
Typical example
(1) Crankshaft gear
(2) Crankshaft
(3) Crankshaft thrust washers
Maximum permissible temperature of the gear for
installation on the crankshaft . . . . . 185° C ((365° F))
Maximum permissible temperature of the timing gear
for the balancer (if equipped) for installation on the
crankshaft . . . . . . . . . . . . . . . . . . . . 185° C ((365° F))
The end play of a new crankshaft
. . . . . . . . 0.1 to 0.41 mm ((0.00394 to 0.01614 inch))
Standard thickness of thrust washer
. . . . . . . 2.69 to 2.75 mm ((0.10591 to 0.10827 inch))
32 UENR0622-02
Specifications Section
This document has been printed from SPI2. NOT FOR RESALE