SPECIFICATIONS

Illustration 43 g02721003
Typical example
(1) Tighten the studs to the following torque.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 N·m ((71 lb in))
(2) Tighten the insert to the following torque.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 N·m ((63 lb ft))
(3) Tighten the nuts to the following torque.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 N·m ((89 lb in))
Illustration 44 g02621860
Typical example
(4) Tighten the clamps to the following torque.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 N·m ((44 lb in))
i04335212
Water Temperature Regulator
and Housing
Illustration 45 g02842121
Typical example
Torque for the vent plug . . . . . . . . . 40 N·m ((30 lb ft))
Torque for the bolts (1) and (2) that fasten the
housing to the cylinder head . . . . . . 25 N·m ((18 lb ft))
Illustration 46 g00906121
Typical example
UENR0622-02 29
Specifications Section
This document has been printed from SPI2. NOT FOR RESALE