SPECIFICATIONS

i04789574
Engine Oil Pan
(Pressed Steel Oil Pan)
Illustration 36 g02904316
Typical example
(1) Tighten the drain plug to the following torque.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 N·m ((37 lb ft))
Tighten the fasteners (2) in sequence that is shown in
illustration 37 . Tighten the M8 fasteners to an initial
torque of 7.5 N·m (66 lb in). Tighten the M10
fasteners to an initial torque of 13.5 N·m (10 lb ft).
Tighten the fasteners (2) in sequence that is shown in
illustration 37 . Tighten the M8 fasteners to a final
torque of 25 N·m (18 lb ft). Tighten the M10
fasteners to a final torque of 45 N·m (33 lb ft).
22 UENR0622-02
Specifications Section
This document has been printed from SPI2. NOT FOR RESALE