SPECIFICATIONS

i05240850
Engine Oil Cooler
Illustration 34 g02871598
Typical example
Tighten the setscrews in the sequence shown in
illustration 34 to the following torque.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 N·m ((16 lb ft))
i04346369
Engine Oil Pump
Illustration 35 g02501357
Typical example
(1) Tighten the bolts to an initial torque.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 N·m ((11 lb ft))
(1) Tighten the bolts to a final torque.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 N·m ((18 lb ft))
i04333169
Engine Oil Pressure
The minimum oil pressure at normal operating
temperature and at an engine speed of 750 rpm is
the following value. . . . . . . . . . . . . .200 kPa ((29 psi))
The minimum oil pressure at normal operating
temperature and at an engine speed of 2400 rpm is
the following value. . . . . . . . . . . . . .400 kPa ((58 psi))
UENR0622-02 21
Specifications Section
This document has been printed from SPI2. NOT FOR RESALE