SPECIFICATIONS

i04411212
Camshaft Bearings
Illustration 32 g02608336
Typical example
(1) The diameter of the installed camshaft bearing
. . .54.083 to 54.147 mm ((2.12925 to 2.13177 inch))
i05240691
Engine Oil Filter Base
Illustration 33 g02659546
Typical example
(1) Tighten the plug to the following torque.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 N·m ((22 lb ft))
(2) Tighten the plug to the following torque.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 N·m ((22 lb ft))
(3) Tighten the engine oil pressure switch to the
following torque. . . . . . . . . . . . . . . . 35 N·m ((26 lb ft))
(4) Tighten the bolts to the following torque.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 N·m ((18 lb ft))
(5) Tighten the filter to the following torque.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 N·m ((22 lb ft))
20 UENR0622-02
Specifications Section
This document has been printed from SPI2. NOT FOR RESALE