SPECIFICATIONS

i05287843

Diesel Particulate Filter

(Through Flow Diesel Particulate

Filter (DPF))

Illustration 30 g03358495

Typical example

(2) Diesel Particulate Filter (DPF)

(3) Clamps

(4) Mounting bracket

(1) Tighten the bolts to an initial torque.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 N·m ((71 lb in))

(1) Tighten the bolts to a second torque.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 N·m ((12 lb ft))

(1) Tighten the bolts to a final torque.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 N·m ((18 lb ft))

i05239470

Camshaft

Illustration 31 g02844377

Typical example

(1) Bolts

Torque for the bolts . . . . . . . . . . 25 N·m ((18 lb ft))

(2) End play of a camshaft

. . . . . . . . . 0.1 to 0.3 mm ((0.00394 to 0.01181 inch))

Maximum permissible end play of a worn camshaft

. . . . . . . . . . . . . . . . . . . . . . . .0.3 mm ((0.01181 inch))

(3) The diameters of the camshaft journals are given

in the following tables.

Table 3

Camshaft Journals

from the Front End of

the Engine

Standard Diameter

Front

53.995 to 54.045 mm

(2.12578 to 2.12775 inch)

2, 3 and 4

49.975 to 50.025 mm

(1.96752 to 1.96948 inch)

Rear

39.975 to 40.025 mm

(1.57382 to 1.57578 inch)

Check the camshaft lobes for visible damage. If a

new camshaft is installed, you must install new lifters.

UENR0622-02 19

Specifications Section

This document has been printed from SPI2. NOT FOR RESALE