SPECIFICATIONS

Illustration 28 g03180056
Typical example
(1) Tube assembly
(4) Bellows
(6) Elbow
(2) Tighten the ball clamp to the following torque.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 N·m ((26 lb ft))
(3) Tighten the clamp to the following torque.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 N·m ((41 lb ft))
(5) Tighten the ball clamp to the following torque.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 N·m ((26 lb ft))
(7) Tighten the V-band clamp to the following torque.
. . . . . . . . . . . . . . . . . . . . . . . . . . . 12 N·m ((106 lb in))
i05287571
Diesel Particulate Filter
(Wall Flow Diesel Particulate
Filter (DPF))
Illustration 29 g03358816
Typical example
(3) Diesel Particulate Filter (DPF)
(4) Clamps
(5) Clamps
(6) Mounting bracket
(1) Tighten the bolts to the following torque.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 N·m ((80 lb in))
(2) Tighten the bolts to an initial torque.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 N·m ((71 lb in))
(2) Tighten the bolts to a second torque.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 N·m ((12 lb ft))
(2) Tighten the bolts to a final torque.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 N·m ((18 lb ft))
18 UENR0622-02
Specifications Section
This document has been printed from SPI2. NOT FOR RESALE