SPECIFICATIONS

i04426264
Exhaust Cooler (NRS)
Illustration 25 g02621805
Typical example
(1) Tighten the nuts to the following torque.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 N·m ((18 lb ft))
(2) Tighten the fastener to the following torque.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.5 N·m ((31 lb in))
(3) Tighten the fastener to the following torque.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 N·m ((89 lb in))
i05239453
Exhaust Manifold
Illustration 26 g02909156
Typical example
(1) Tighten the studs to the following torque.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 N·m ((13 lb ft))
16 UENR0622-02
Specifications Section
This document has been printed from SPI2. NOT FOR RESALE