SPECIFICATIONS

Illustration 12 g02727663
Typical example
Tighten the M6 fasteners (1), (2), (3), (4), (5), (6) and
(7) in the sequence shown in illustration 12 to a final
torque. . . . . . . . . . . . . . . . . . . . . . . 10 N·m ((89 lb in))
Tighten the M8 fasteners (8), (9) and (10) in the
sequence shown in illustration 12 to a final torque.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 N·m ((18 lb ft))
i04335069
Cylinder Head Valves
Illustration 13 g01335203
Typical example
When the valve springs (1) are replaced the valve
springs must be replaced in pairs.
10 UENR0622-02
Specifications Section
This document has been printed from SPI2. NOT FOR RESALE