Disassembly and assembly

Illustration 161 g02663376
Illustration 162 g02663417
2. Remove bolts (1) from water pump (2).
3. Remove water pump (2) from the cylinder block.
4. Remove seal (3).
i05270787
Water Pump - Install
Installation Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened
component life.
1. Ensure that the water pump is clean and free from
wear and damage. If necessary, replace the water
pump. Clean the seal surface of the water pump.
UENR0624-03 95
Disassembly and Assembly Section
This document has been printed from SPI2. NOT FOR RESALE