Disassembly and assembly

Illustration 129 g03015096

Typical example

1. Remove bolts (2) from bracket (3).

2. Remove bolts (4) from bracket (3).

3. Remove bolts (7) from bracket (3) and remove

bracket (3) from the engine. The weight of bracket

(3) is approximately 10 kg (22 lb).

4. If necessary, remove bolts (9) (not shown) and

remove bracket (8) from the engine.

5. If necessary, remove bolts (6) and remove bracket

(5) from the engine.

CEM Assembly Installation

Procedure

Illustration 130 g03013176

Illustration 131 g03015096

1. If necessary, using temporary marks position

bracket (8) and install bolts (9) (not shown).

Tighten bolts (9) hand tight.

2. If necessary, using temporary marks position

bracket (5) and install bolts (6). Tighten bolts (6)

hand tight.

3. Position bracket (3) and loosely install bolts (4)

loosely install bolts (2), and loosely install bolts (7).

UENR0624-03

Disassembly and Assembly Section

This document has been printed from SPI2. NOT FOR RESALE