Disassembly and assembly

Illustration 123 g03020379
1. Remove bolts (3) from bracket (2).
2. Remove bolts (7) from bracket (2).
3. Remove bolts (6) from bracket (2) and remove
bracket (2) from the engine. The weight of bracket
(2) is approximately 10 kg (22 lb).
4. If necessary, remove bolts (4) from bracket (5).
remove bracket (5) from the engine.
5. Remove bolts (8) from bracket (9) and remove
bracket (9) from the engine.
CEM Assembly Installation
Procedure
Illustration 124 g03019496
Illustration 125 g03020379
1. If necessary, using temporary marks position
bracket (5) onto the engine install bolts (4).
Tighten bolts (4) hand tight.
2. If necessary, using temporary marks position
bracket (9) onto the engine. Tighten bolts (8) hand
tight.
3. Position bracket (2) and loosely install bolts (3),
loosely install bolts (6), and loosely install bolts (7).
74 UENR0624-03
Disassembly and Assembly Section
This document has been printed from SPI2. NOT FOR RESALE