Disassembly and assembly

13. Cut cable straps from the suitable material that
was encasing bellows (3) between Position (A)
and Position (B). Remove the suitable material
from bellows (3).
i05270715
Exhaust Manifold - Remove
and Install
Removal Procedure
Start By:
a. Remove the turbocharger. Refer to
Disassembly and Assembly, “Turbocharger -
Remove” for the correct procedure.
Illustration 108 g02725206
UENR0624-03 63
Disassembly and Assembly Section
This document has been printed from SPI2. NOT FOR RESALE