Disassembly and assembly

Illustration 77 g02868256
12. If necessary, follow Step 12.a through Step 12.f in
order to remove boost pressure chamber cover
(33).
a. Remove the alternator and mounting bracket.
Refer to Disassembly and Assembly, “Alternator
- Remove and Install” for the correct procedure.
b. Remove banjo bolt (28) and remove sealing
washers (29) (not shown) from hose assembly
(8).
c. Remove banjo bolt (32) and remove sealing
washers (31) (not shown) from hose assembly
(26).
d. Release the tube assembly (26) from clip (25)
and position the hose assembly away from
boost pressure chamber cover (33).
e. Remove bolts (30) and remove boost pressure
chamber cover (33) from the oil cooler.
f. Remove gasket (27) (not shown).
i05270674
Turbocharger - Remove
(Side Mounted Turbochargers)
Removal Procedure
Start By:
a. Remove the flexible exhaust pipe from the
turbocharger. Refer to Disassembly and
Assembly, “Flexible Exhaust Pipe - Remove
and Install” for the correct procedure.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened
component life.
NOTICE
Care must be taken to ensure that fluids are con-
tained during performance of inspection, mainte-
nance, testing, adjusting and repair of the product.
Be prepared to collect the fluid with suitable contain-
ers before opening any compartment or disassem-
bling any component containing fluids.
Dispose of all fluids according to local regulations
and mandates.
46 UENR0624-03
Disassembly and Assembly Section
This document has been printed from SPI2. NOT FOR RESALE