Disassembly and assembly

8. Install the alternator belt. Refer to Disassembly
and Assembly, “Alternator Belt - Remove and
Install” for the correct procedure.
i05284622
Alternator - Remove
Removal Procedure
Start By:
a. Remove the alternator belt. Refer to
Disassembly and Assembly, “Alternator Belt -
Remove and Install” for the correct procedure.
1. Turn the battery disconnect switch to the OFF
position.
Illustration 355 g02673920
Illustration 356 g02815777
2. Make temporary marks on the alternator harness
in order to identify the locations for the
connections during the assembly procedure.
3. Disconnect the harness assembly from alternator
(6).
4. Support the weight of the alternator and remove
nut (1) and bolt (2).
5. Remove nut (3) and bolt (5) (not shown) from
alternator (6).
6. Remove alternator (6) from alternator bracket (4).
196 UENR0624-03
Disassembly and Assembly Section
This document has been printed from SPI2. NOT FOR RESALE