Disassembly and assembly

End By:
a. Install a new alternator belt. Refer to
Disassembly and Assembly, “Alternator Belt -
Install” for the correct procedure.
i05284618
Fan - Remove and Install
Removal Procedure
Start By:
a. Remove the alternator belt. Refer to
Disassembly and Assembly, “Alternator Belt -
Remove and Install” for the correct procedure.
Illustration 351 g02829456
Typical example
1. Remove nuts (1).
2. Remove fan (2).
Note: Note the orientation of the fan.
3. Remove fan adapter (3).
4. Remove fan pulley (4).
5. If necessary, remove studs (5) from fan drive (6).
Installation Procedure
1. Ensure that all the components are free from wear
and damage. If necessary, replace any
components that are worn or damaged.
Illustration 352 g02829456
Typical example
2. If necessary, install studs (5) to fan drive (6).
Tighten studs (5) to a torque of 11 N·m (97 lb in).
3. If studs (5) have not been previously removed from
fan drive (6). Check for the correct installation of
the studs to the fan drive. Tighten studs (5) to a
torque of 25 N·m (221 lb in).
4. Install fan pulley (4).
5. Install fan adapter (3).
6. Install fan (2).
Note: Ensure that the fan is correctly oriented.
7. Inspect the condition of locking nuts (1). If
necessary, replace the locking nuts. Install locking
nuts (1). Tighten locking nuts (1) to a torque of
22 N·m (195 lb in).
End By:
a. Install the Alternator Belt. Refer to
Disassembly and Assembly, “Alternator Belt -
Remove and Install” for the correct procedure.
i05284619
Fan Drive - Remove and Install
Removal Procedure
1. If necessary, remove the fan. Refer to
Disassembly and Assembly, “Fan - Remove and
Install” for the correct procedure.
194 UENR0624-03
Disassembly and Assembly Section
This document has been printed from SPI2. NOT FOR RESALE