Disassembly and assembly

5. If necessary, repeat Step 2 through Step 4 in order
to install the remaining temperature sensor to the
DPF.
i05282755
Pressure Sensor (DPF)
-Remove and Install
Removal Procedure
Illustration 332 g03005940
1. Disconnect the harness connector from Diesel
Particulate Filter (DPF) differential pressure
sensor (2).
2. Remove clip (4) from hose assembly (6). Remove
clip (5) from hose assembly (7).
3. Disconnect hose assembly (6) and hose assembly
(7) from DPF differential pressure sensor (2).
4. Remove bolt (3) from DPF differential pressure
sensor (2).
5. Remove DPF differential pressure sensor (2) from
bracket (1).
Installation Procedure
Illustration 333 g03005940
1. Position DPF differential pressure sensor (2) onto
bracket (1).
2. Install bolt (3) finger tight to DPF differential
pressure sensor (2). Tighten the bolt to a torque of
9 N·m (80 lb in)
3. Position a new clip (4) onto hose assembly (6).
4. Install hose assembly (6) and clip (4) onto DPF
differential pressure sensor (2). Tighten clip (4)
securely.
Note: Do not over tighten clip (4).
5. Position a new clip (5) onto hose assembly (7).
6. Install hose assembly (7) and clip (5) onto DPF
differential pressure sensor (2). Tighten clip (5)
securely.
Note: Do not over tighten clip (5).
7. Connect the harness assembly to DPF differential
pressure sensor (2).
184 UENR0624-03
Disassembly and Assembly Section
This document has been printed from SPI2. NOT FOR RESALE