Disassembly and assembly

Illustration 23 g03011038
1. If necessary, follow Step 1.a through Step 1.c in
order to install the bracket for secondary fuel filter.
a. If necessary, install studs (9) to fuel filter bracket
(10). Tighten studs (9) to a torque of 18 N·m
(159 lb in).
b. Position fuel filter bracket (10) onto the valve
mechanism cover. Install bolts (11) to fuel filter
bracket (10).
c. Tighten bolts (11) to a torque of 25 N·m
(221 lb in).
Illustration 24 g03011037
2. Ensure that fuel filter base (3) is clean and free
from damage. If necessary, replace the complete
fuel filter base and filter assembly.
3. Position fuel filter base (3) on the mounting
bracket. Install nuts (6). Tighten the bolts to a
torque of 25 N·m (221 lb in).
4. If necessary, install a new fuel filter (7) to canister
(8). Install cannister (8) to fuel filter base (3). Refer
to Operation and Maintenance Manual, “Fuel
System Secondary Filter - Replace” for the correct
procedure.
16 UENR0624-03
Disassembly and Assembly Section
This document has been printed from SPI2. NOT FOR RESALE