Disassembly and assembly

Illustration 217 g02729108
2. Remove bolts (5) from front housing (1).
Note: Note the positions of the different length bolts
for installation purposes.
3. Remove front housing (1) from the cylinder block
and dowels (6) (not shown).
4. Dowels (6) (not shown) should only be removed if
damaged.
5. If necessary, follow Step 5.a through Step 5.c in
order to remove engine oil filler (2).
a. Remove bolts (3) from engine oil filler (2).
b. Remove engine oil filler (2) from front housing
(1).
c. Remove O-ring seal (4) (not shown).
Illustration 218 g03025257
Illustration 219 g03025256
6. If necessary, follow Step 6.a through Step 6.c in
order to remove cover plate (8) from the front
housing.
a. Remove bolts (9) from cover plate (8).
b. Remove cover plate (8) from front housing (1).
c. Remove O-ring seal (10) from the cover plate.
122 UENR0624-03
Disassembly and Assembly Section
This document has been printed from SPI2. NOT FOR RESALE