Disassembly and assembly
Installation Procedure
Table 36
Required Tools
Tool Part Number
Part Description Qty
A
-
Guide Stud
M8 by 100 mm
2
B
-
Loctite 5970 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened
component life.
1. Ensure that the flywheel housing is clean and free
from damage. If necessary, replace the flywheel
housing.
Illustration 192 g02882197
Illustration 193 g02659298
UENR0624-03 109
Disassembly and Assembly Section
This document has been printed from SPI2. NOT FOR RESALE