Disassembly and assembly

Illustration 172 g03001176
View of the engine lifting brackets on the rear of the
engine
1. Position lifting bracket (1) onto fan drive (3). Refer
to Illustration 171 .
2. Install bolts (2) finger tight to lifting bracket (1).
Tighten the bolts to a torque of 45 N·m (33 lb ft).
3. Position lifting bracket (4) onto the cylinder head.
Refer to Illustration 172 .
4. Install bolts (7) finger tight to lifting bracket (4).
Tighten the bolts to a torque of 65 N·m (48 lb ft).
5. Position lifting bracket (5) onto the cylinder head.
Refer to Illustration 172 .
6. Install bolts (6) finger tight to lifting bracket (5).
Tighten the bolts to a torque of 65 N·m (48 lb ft).
Option 2
Illustration 173 g03001576
View of the engine lifting bracket on the front of the
engine
Illustration 174 g03001603
View of the engine lifting brackets on the rear of the
engine
1. Position lifting bracket (8) onto fan drive (10). Refer
to Illustration 173 .
2. Install bolts (9) finger tight to lifting bracket (8).
Tighten the bolts to a torque of 45 N·m (33 lb ft).
3. Position lifting bracket (11) onto the flywheel
housing. Refer to Illustration 174 .
100 UENR0624-03
Disassembly and Assembly Section
This document has been printed from SPI2. NOT FOR RESALE