User Manual

If you inspect the engine in operation, always use the
proper inspection procedure in order to avoid a fluid
penetration hazard. Refer to Operation and
Maintenance Manual, “General hazard Information”.
If the engine will not start, refer to Troubleshooting,
“Engine Cranks but will not Start”.
i05241801
Fuel System Pressure - Test
Table 4
Required Tools
Tool Part Number
Part Description Qty
A
-
Pressure gauge
(1)
1
B
T400138 Pressure test kit 1
(1)
Pressure gauge needs to be able to measure pressure in a
vacuum.
NOTICE
Ensure that all adjustments and repairs that are
carried out to the fuel system are performed by
authorized personnel that have the correct
training.
Before beginning ANY work on the fuel system,
refer to Operation and Maintenance Manual,
“General Hazard Information and High Pressure
Fuel Lines” for safety information.
Refer to Systems Operation, Testing and Adjust-
ing, “Cleanliness of Fuel System Components”
for detailed information on the standards of
cleanliness that must be observed during ALL
work on the fuel system.
Note: Ensure that the engine is stopped before
installing and removing Tooling (A) and (B) or
carrying out any repair work on the fuel system.
60 UENR0623-02
Fuel System
This document has been printed from SPI2. NOT FOR RESALE