Disassembly and assembly

KENR6226-01 89
Disassembly and Assembly Section
g01311527
Illustration 166
Typical example
4. Attach a suitable lifting device (3) to crankshaft
assembly (4).
5. Carefully lift crankshaft assembly (4) from the
cylinder block. If necessary, gently tap the nose of
the crankshaft with a soft faced hammer.
Note: Install the nut for the crankshaft pulley in order
to protect the nose of the crankshaft. Do not scratch
any of the finished surfaces on the crankshaft.
i02961985
Cranksh aft - Install
Installation Procedure
Table 29
Required Tools
Tool
Part
Number
Part Description Qty
A 21825617
Dial Indicator Group
1
1. The engine should be mounted in a suitable stand
with the r
ear end upward.
2. Ensure that the crankshaft assembly is clean and
free from
damage.
g01311527
Illustration 167
Typical example
3. Attach a suitable lifting device (3) to crankshaft
assembly (4). Lubricate the front journal of the
crankshaft with clean engine oil.
g01311526
Illustration 168
Typical example
NOTICE
Ensure that the oil passages in the main bearings align
with the oil passages in the cylinder block.
This document has been printed from SPI². Not for Resale