Disassembly and assembly

86 KENR6226-01
Disassembly and Assembly Section
g01327056
Illustration 159
g01327033
Illustration 160
Typical example
2. Remove bolts (1) and upper main bearing cap (2)
from lower main bearing cap (6).
3. For C1.5 engines, remove thrust washers (7).
For C2.2 engines, remove thrust washers (3) and
(7).
4. Remove main bearings (4) and (5) from the main
bearing caps. K
eep the main bearings with the
respective bearing caps.
5. Do not remove d
owels (8) from the main bearing
caps.
Crankshaft Be
aring (Front)
Table 27
Required Tools
Tool
Part
Number
Part Description
Qty
A
27610275
Driver 1
g01327066
Illustration 161
1. Use Tooling (A) to remove crankshaft bearing (9)
from the cylinder block.
i02963756
Crankshaft Main Bearings -
Install
Installation Procedure
Crankshaft Main Bearings
1. Clean the crankshaft and inspect the crankshaft
for wear or damage. Refer to Specifications,
“Crankshaft” for more information.
2. Clean the main bearings and the main bearing
caps. For 403D-15, 403D-15T, 403D-17, 404D-22,
404D-22T and 404D-22TA engines, clean the
thrust washers. Inspect all components for wear
or damage.
This document has been printed from SPI². Not for Resale