Disassembly and assembly

ManualsBrandsPerkins Engine ManualsOtherDisassembly and Assembly 402D-403D-404D Industrial Engine

KENR6226-01 73

Disassembly and Assembly Section

g01311407

Illustration 134

Typical example

g013114

Illustration 135

Typical example

2. Remove s

lider (3) from camshaft gear (4).

Note: 402D-05, 403D-07, 403D-11, and 404D-15

engines

have a different camshaft retainer and

different fasteners to 403D-15, 403D-15T, 403D-17,

404D-22, 404D-22T and 404D-22TA engines. The

removal

procedure is similar for all models.

3. Rotate camshaft gear (4) in order to align the

access

hole in the camshaft gear with fastener (2).

For 402D-05, 403D-07, 403D-11, and 404D-15

engine

s, remove allen head screw (2) and remove

bolt (1).

For 403D-15, 403D-15T, 403D-17, 404D-22,

404D-22T and 40

4D-22TA engines, remove bolt

(2). Rotate camshaft gear (4) in order to align the

access hole in the camshaft gear with bolt (1).

Remove bolt (1

4. Remove camshaft retainer (5).

5. Rotate the crankshaft until timing marks (X) are

aligned on the following gears:

•

Crankshaft gear (7)

•

Camshaft gea

r(4)

•

Idlergear(6)

g01311416

Illustration 136

Typical example

6. Carefully remove camshaft assembly (8) from the

cylinder block.

Note: Ensure that the lobes of the camshaft and the

camshaft bearings are not damaged.

i02645655

Camshaft - Disassem ble

Disassembly Procedure

Table 22

Required Tools

Tool

Part

Number

Part Name Qty

Combination Puller

Start By:

a. Remove the camshaft assembly. Refer to

Disassembly and Assembly, “Camshaft -

Remove”.

This document has been printed from SPI². Not for Resale