Disassembly and assembly

KENR6226-01 51
Disassembly and Assembly Section
g01354631
Illustration 88
Typical example
2. Remove bolts (5) and remove the assembly of
throttle control (1) from front housing (3).
3. Remove joint (6).
g01357717
Illustration 89
Typical example
4. Remove shaft (9) from front housing (3).
5. Remove lever assembly (7) from front housing (3).
6. Remove sealing washer (8) from shaft (9).
g01357689
Illustration 90
7. Iftheengineisequippedwithanangleichunit,
remove angleich unit (10) from lever assembly (7).
g01357693
Illustration 91
Typical example
This document has been printed from SPI². Not for Resale